Gen2/Rear Axle

From Unofficial Zero Manual
Jump to navigation Jump to search

The rear axle is hollow, threaded on the right side and capped on the left for swingarm fitment.

Axle measurements
Years Inner Diameter Outer Diameter Pitch
2015+ 11mm 20mm 1.25mm


This is part of Rear Wheel Removal.

  • 27mm socket
  • Breaker bar
  1. Place the motorcycle on a lift or rear stand so the wheel spins freely.
  2. Mark/photograph where the alignment marks reside on each side of the axle for re-alignment when re-installing the wheel.
  3. Loosen the rear axle nut on the right side (27mm) with the breaker bar.
  4. Remove the rear axle nut.
  5. Pull the axle part-way out so that the wheel can be moved forward enough to loosen the belt.
  6. Pull the belt off of the rear sprocket and let it hang outside of the swingarm slightly to avoid interfering with the wheel.
  7. Pull the axle through the wheel from the left side.


See Rear Wheel Install