SDS Platform/Lower Plastics Removal

From Unofficial Zero Manual
Jump to navigation Jump to search

This removes the lower side panel plastics from 2012+ S platform models.

Notes
2014+ plastics are depicted.
Tools
  • 3mm Allen key
Steps (2014)+
  1. Use the 3mm Allen key to remove the three M5 bolts holding each side panel: one at the top front corner, and one at each corner near the lower edge.
    File:Lower plastics bolt1.jpg
    Top Front Corner bolt
  2. Remove each side panel.
  3. Use the 3mm Allen key to remove the 2 bolts on each side holding the front panel on and remove it.
  4. (Optional) Use the 3mm Allen key to remove the 2 M5 bolts on each side (4 total) to remove the front plastics covering the battery.
Steps (2012-2013)
  1. Use the 3mm Allen wrench to remove the three M5 bolts holding each side panel.
  2. (Optional) Use the ball-point pen or similar non-scratching pointed tool to push the center pin to release the plastic rivets on the front panel and remove it.
References
Adapted from this forum post.