Gen2/Implement Variable Regen

From Unofficial Zero Manual
Jump to navigation Jump to search
Variable Regen is an attractive feature that the Sevcon controller can implement but Zero doesn't deliver in their Gen2 platform models.
  1. Install a connection into an unused analog input on the SevCon controller's 35-pin AMPSeal connector.
    Use Sevcon's DVT software to configure the software to read it and map it appropriately.
  2. Install a handle or switch to control the regen.
    Mount a handle or switch that provides a variable voltage output on the handlebar.
    Wire it up and amplify or tune the sensor to match the input requirements.