SDS Platform/Seat Removal

From Unofficial Zero Manual
Jump to navigation Jump to search

This removes the seat, primarily written for the SDS Platform.

  • Unload any luggage racks before taking the seat off for an extended period of time to avoid stressing the racks.
    When luggage racks are installed, the seat bolts are load bearing (or at least damping).
  • An M8-1.25x55mm socket cap bolt with a 6mm Allen head can be used if the kit bolt is lost.
  • 2015+: T45 Torx wrench (for seat bolts).
  • 2013-2014 (with top or side racks): 5mm Allen key (for seat bolts).
  1. When luggage racks are installed Remove the top case and/or side cases to ensure the rack is unloaded.
  2. Remove the M8-1.25⨉50 seat bolts.
    File:MY2016DSR seatfastener withtoprack.jpg
    Seat Fasteners with Top Rack Installed
  3. Pull the seat back a couple of inches and then upwards.